---
# headscale will look for a configuration file named `config.yaml` (or `config.json`) in the following order:
#
# - `/etc/headscale`
# - `~/.headscale`
# - current working directory

# The url clients will connect to.
# Typically this will be a domain like:
#
# https://myheadscale.example.com:443
#
server_url: http://127.0.0.1:8080

# Address to listen to / bind to on the server
#
# For production:
# listen_addr: 0.0.0.0:8080
listen_addr: 127.0.0.1:8080

# Address to listen to /metrics, you may want
# to keep this endpoint private to your internal
# network
#
metrics_listen_addr: 127.0.0.1:9090

# Address to listen for gRPC.
# gRPC is used for controlling a headscale server
# remotely with the CLI
# Note: Remote access _only_ works if you have
# valid certificates.
#
# For production:
# grpc_listen_addr: 0.0.0.0:50443
grpc_listen_addr: 127.0.0.1:50443

# Allow the gRPC admin interface to run in INSECURE
# mode. This is not recommended as the traffic will
# be unencrypted. Only enable if you know what you
# are doing.
grpc_allow_insecure: false

# The Noise section includes specific configuration for the
# TS2021 Noise protocol
noise:
  # The Noise private key is used to encrypt the
  # traffic between headscale and Tailscale clients when
  # using the new Noise-based protocol.
  private_key_path: /var/lib/headscale/noise_private.key

# List of IP prefixes to allocate tailaddresses from.
# Each prefix consists of either an IPv4 or IPv6 address,
# and the associated prefix length, delimited by a slash.
# It must be within IP ranges supported by the Tailscale
# client - i.e., subnets of 100.64.0.0/10 and fd7a:115c:a1e0::/48.
# See below:
# IPv6: https://github.com/tailscale/tailscale/blob/22ebb25e833264f58d7c3f534a8b166894a89536/net/tsaddr/tsaddr.go#LL81C52-L81C71
# IPv4: https://github.com/tailscale/tailscale/blob/22ebb25e833264f58d7c3f534a8b166894a89536/net/tsaddr/tsaddr.go#L33
# Any other range is NOT supported, and it will cause unexpected issues.
prefixes:
  v6: fd7a:115c:a1e0::/48
  v4: 100.64.0.0/10

  # Strategy used for allocation of IPs to nodes, available options:
  # - sequential (default): assigns the next free IP from the previous given IP.
  # - random: assigns the next free IP from a pseudo-random IP generator (crypto/rand).
  allocation: sequential

# DERP is a relay system that Tailscale uses when a direct
# connection cannot be established.
# https://tailscale.com/blog/how-tailscale-works/#encrypted-tcp-relays-derp
#
# headscale needs a list of DERP servers that can be presented
# to the clients.
derp:
  server:
    # If enabled, runs the embedded DERP server and merges it into the rest of the DERP config
    # The Headscale server_url defined above MUST be using https, DERP requires TLS to be in place
    enabled: false

    # Region ID to use for the embedded DERP server.
    # The local DERP prevails if the region ID collides with other region ID coming from
    # the regular DERP config.
    region_id: 999

    # Region code and name are displayed in the Tailscale UI to identify a DERP region
    region_code: "headscale"
    region_name: "Headscale Embedded DERP"

    # Listens over UDP at the configured address for STUN connections - to help with NAT traversal.
    # When the embedded DERP server is enabled stun_listen_addr MUST be defined.
    #
    # For more details on how this works, check this great article: https://tailscale.com/blog/how-tailscale-works/
    stun_listen_addr: "0.0.0.0:3478"

    # Private key used to encrypt the traffic between headscale DERP
    # and Tailscale clients.
    # The private key file will be autogenerated if it's missing.
    #
    private_key_path: /var/lib/headscale/derp_server_private.key

    # This flag can be used, so the DERP map entry for the embedded DERP server is not written automatically,
    # it enables the creation of your very own DERP map entry using a locally available file with the parameter DERP.paths
    # If you enable the DERP server and set this to false, it is required to add the DERP server to the DERP map using DERP.paths
    automatically_add_embedded_derp_region: true

    # For better connection stability (especially when using an Exit-Node and DNS is not working),
    # it is possible to optionally add the public IPv4 and IPv6 address to the Derp-Map using:
    ipv4: 1.2.3.4
    ipv6: 2001:db8::1

  # List of externally available DERP maps encoded in JSON
  urls:
    - https://controlplane.tailscale.com/derpmap/default

  # Locally available DERP map files encoded in YAML
  #
  # This option is mostly interesting for people hosting
  # their own DERP servers:
  # https://tailscale.com/kb/1118/custom-derp-servers/
  #
  # paths:
  #   - /etc/headscale/derp-example.yaml
  paths: []

  # If enabled, a worker will be set up to periodically
  # refresh the given sources and update the derpmap
  # will be set up.
  auto_update_enabled: true

  # How often should we check for DERP updates?
  update_frequency: 24h

# Disables the automatic check for headscale updates on startup
disable_check_updates: false

# Time before an inactive ephemeral node is deleted?
ephemeral_node_inactivity_timeout: 30m

database:
  # Database type. Available options: sqlite, postgres
  # Please note that using Postgres is highly discouraged as it is only supported for legacy reasons.
  # All new development, testing and optimisations are done with SQLite in mind.
  type: sqlite

  # Enable debug mode. This setting requires the log.level to be set to "debug" or "trace".
  debug: false

  # GORM configuration settings.
  gorm:
    # Enable prepared statements.
    prepare_stmt: true

    # Enable parameterized queries.
    parameterized_queries: true

    # Skip logging "record not found" errors.
    skip_err_record_not_found: true

    # Threshold for slow queries in milliseconds.
    slow_threshold: 1000

  # SQLite config
  sqlite:
    path: /var/lib/headscale/db.sqlite

    # Enable WAL mode for SQLite. This is recommended for production environments.
    # https://www.sqlite.org/wal.html
    write_ahead_log: true

  # # Postgres config
  # Please note that using Postgres is highly discouraged as it is only supported for legacy reasons.
  # See database.type for more information.
  # postgres:
  #   # If using a Unix socket to connect to Postgres, set the socket path in the 'host' field and leave 'port' blank.
  #   host: localhost
  #   port: 5432
  #   name: headscale
  #   user: foo
  #   pass: bar
  #   max_open_conns: 10
  #   max_idle_conns: 10
  #   conn_max_idle_time_secs: 3600

  #   # If other 'sslmode' is required instead of 'require(true)' and 'disabled(false)', set the 'sslmode' you need
  #   # in the 'ssl' field. Refers to https://www.postgresql.org/docs/current/libpq-ssl.html Table 34.1.
  #   ssl: false

### TLS configuration
#
## Let's encrypt / ACME
#
# headscale supports automatically requesting and setting up
# TLS for a domain with Let's Encrypt.
#
# URL to ACME directory
acme_url: https://acme-v02.api.letsencrypt.org/directory

# Email to register with ACME provider
acme_email: ""

# Domain name to request a TLS certificate for:
tls_letsencrypt_hostname: ""

# Path to store certificates and metadata needed by
# letsencrypt
# For production:
tls_letsencrypt_cache_dir: /var/lib/headscale/cache

# Type of ACME challenge to use, currently supported types:
# HTTP-01 or TLS-ALPN-01
# See [docs/tls.md](docs/tls.md) for more information
tls_letsencrypt_challenge_type: HTTP-01
# When HTTP-01 challenge is chosen, letsencrypt must set up a
# verification endpoint, and it will be listening on:
# :http = port 80
tls_letsencrypt_listen: ":http"

## Use already defined certificates:
tls_cert_path: ""
tls_key_path: ""

log:
  # Output formatting for logs: text or json
  format: text
  level: info

## Policy
# headscale supports Tailscale's ACL policies.
# Please have a look to their KB to better
# understand the concepts: https://tailscale.com/kb/1018/acls/
policy:
  # The mode can be "file" or "database" that defines
  # where the ACL policies are stored and read from.
  mode: file
  # If the mode is set to "file", the path to a
  # HuJSON file containing ACL policies.
  path: ""

## DNS
#
# headscale supports Tailscale's DNS configuration and MagicDNS.
# Please have a look to their KB to better understand the concepts:
#
# - https://tailscale.com/kb/1054/dns/
# - https://tailscale.com/kb/1081/magicdns/
# - https://tailscale.com/blog/2021-09-private-dns-with-magicdns/
#
# Please note that for the DNS configuration to have any effect,
# clients must have the `--accept-dns=true` option enabled. This is the
# default for the Tailscale client. This option is enabled by default
# in the Tailscale client.
#
# Setting _any_ of the configuration and `--accept-dns=true` on the
# clients will integrate with the DNS manager on the client or
# overwrite /etc/resolv.conf.
# https://tailscale.com/kb/1235/resolv-conf
#
# If you want stop Headscale from managing the DNS configuration
# all the fields under `dns` should be set to empty values.
dns:
  # Whether to use [MagicDNS](https://tailscale.com/kb/1081/magicdns/).
  # Only works if there is at least a nameserver defined.
  magic_dns: true

  # Defines the base domain to create the hostnames for MagicDNS.
  # This domain _must_ be different from the server_url domain.
  # `base_domain` must be a FQDN, without the trailing dot.
  # The FQDN of the hosts will be
  # `hostname.base_domain` (e.g., _myhost.example.com_).
  base_domain: example.com

  # List of DNS servers to expose to clients.
  nameservers:
    global:
      - 1.1.1.1
      - 1.0.0.1
      - 2606:4700:4700::1111
      - 2606:4700:4700::1001

      # NextDNS (see https://tailscale.com/kb/1218/nextdns/).
      # "abc123" is example NextDNS ID, replace with yours.
      # - https://dns.nextdns.io/abc123

    # Split DNS (see https://tailscale.com/kb/1054/dns/),
    # a map of domains and which DNS server to use for each.
    split:
      {}
      # foo.bar.com:
      #   - 1.1.1.1
      # darp.headscale.net:
      #   - 1.1.1.1
      #   - 8.8.8.8

  # Set custom DNS search domains. With MagicDNS enabled,
  # your tailnet base_domain is always the first search domain.
  search_domains: []

  # Extra DNS records
  # so far only A-records are supported (on the tailscale side)
  # See https://github.com/juanfont/headscale/blob/main/docs/dns-records.md#Limitations
  extra_records: []
  #   - name: "grafana.myvpn.example.com"
  #     type: "A"
  #     value: "100.64.0.3"
  #
  #   # you can also put it in one line
  #   - { name: "prometheus.myvpn.example.com", type: "A", value: "100.64.0.3" }

  # DEPRECATED
  # Use the username as part of the DNS name for nodes, with this option enabled:
  # node1.username.example.com
  # while when this is disabled:
  # node1.example.com
  # This is a legacy option as Headscale has have this wrongly implemented
  # while in upstream Tailscale, the username is not included.
  use_username_in_magic_dns: false

# Unix socket used for the CLI to connect without authentication
# Note: for production you will want to set this to something like:
unix_socket: /var/run/headscale/headscale.sock
unix_socket_permission: "0770"
#
# # headscale supports experimental OpenID connect support,
# # it is still being tested and might have some bugs, please
# # help us test it.
# # OpenID Connect
# oidc:
#   only_start_if_oidc_is_available: true
#   issuer: "https://your-oidc.issuer.com/path"
#   client_id: "your-oidc-client-id"
#   client_secret: "your-oidc-client-secret"
#   # Alternatively, set `client_secret_path` to read the secret from the file.
#   # It resolves environment variables, making integration to systemd's
#   # `LoadCredential` straightforward:
#   # client_secret_path: "${CREDENTIALS_DIRECTORY}/oidc_client_secret"
#   # client_secret and client_secret_path are mutually exclusive.
#   #
#   # Customize the scopes used in the OIDC flow, defaults to "openid", "profile" and "email" and add custom query
#   # parameters to the Authorize Endpoint request. Scopes default to "openid", "profile" and "email".
#   scope: ["openid", "profile", "email", "custom"]
#   #   extra_params:
#   #     domain_hint: example.com

#   expiry:
#     #
#     # Use the expiry from the token received from OpenID when the user logged
#     # in, this will typically lead to frequent need to reauthenticate and should
#     # only been enabled if you know what you are doing.
#     # Note: enabling this will cause `oidc.expiry.fixed_time` to be ignored.
#     from_token: false
#     #
#     # The amount of time from a node is authenticated with OpenID until it
#     # expires and needs to reauthenticate.
#     # Setting the value to "0" will mean no expiry.
#     fixed_time: 180d

#   # # List allowed principal domains and/or users. If an authenticated user's domain is not in this list, the
#   # # authentication request will be rejected.
#   # allowed:
#   #   domains:
#   #     - example.com
#   #   groups:
#   #     - admins
#   #   users:
#   #     - admin@example.com

#   #  Map claims from the OIDC token to the user object
#   claims_map:
#     name: name
#     username: email
#    # username: preferred_username
#     email: email
#     groups: groups
    

#   #  some random configuration
#   misc:
#     # if the username is set to `email` then `strip_email_domain` is valid
#     # If `strip_email_domain` is set to `true`, the domain part of the username email address will be removed.
#     # This will transform `first-name.last-name@example.com` to the user `first-name.last-name`
#     # If `strip_email_domain` is set to `false` the domain part will NOT be removed resulting to the following
#     # user: `first-name.last-name.example.com`
#     strip_email_domain: true
#     # If `flatten_groups` is set to `true`, the groups claim will be flattened to a single level.
#     # this is used for keycloak where the groups are nested. the groups format from keycloak is `group1/subgroup1/subgroup2`
#     flatten_groups: true
#     # If `flatten_splitter` is set to a string, the groups claim will be split by the string and flattened to a single level.
#     flatten_splitter: "/"

# Logtail configuration
# Logtail is Tailscales logging and auditing infrastructure, it allows the control panel
# to instruct tailscale nodes to log their activity to a remote server.
logtail:
  # Enable logtail for this headscales clients.
  # As there is currently no support for overriding the log server in headscale, this is
  # disabled by default. Enabling this will make your clients send logs to Tailscale Inc.
  enabled: false

# Enabling this option makes devices prefer a random port for WireGuard traffic over the
# default static port 41641. This option is intended as a workaround for some buggy
# firewall devices. See https://tailscale.com/kb/1181/firewalls/ for more information.
randomize_client_port: false